Fischer fbn ii 12/80 (12x174) gs zp šroubová kotva

Objednací číslo	45578FIS
Průměr
Délka
Šířka klíče (mm)	19
Délka (m)	174
Typ závitu	Metrické

Zobrazit všechny specifikace

Specifikace

Průměr	M12
Délka	129 mm
Šířka klíče (mm)	19
Délka (m)	174
Typ závitu	Metrické
Velikost závitu (metrická)	12
Průměr vrtaného otvoru (mm)	12
Počet podložek	1
Upevňovací ustanovení	Matice
Vzpěry	Dělená kotva
Počet matic	1
Průchozí montáž	Ano
Předsazená instalace	Ano
Rozložená instalace	Ne
Max. tloušťka upnutí (mm)	80
Kotva pro ochranu povrchu	Galvanicky/elektrolyticky pozinkováno
S límcem	Ne
Upevnění pomocí rozšiřujícího nástroje	Ne
Model kotvy	Vnější závit
Značka	Fischer
Klíčové vlastnosti	Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-Certifikát	Yes
Váha kusu (g)	181.665
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS kód	7318190090

Stáhnout jako PDF Tisk

Popis

The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Čísla materiálu

Objednací číslo	45578FIS
EAN	4006209455784
UBB	500616648894
UNSPSC	31162101
Výrobní číslo položky	45578

Stáhnout jako PDF Tisk

Stáhnout další informace