Spiralock Nakrętki zabezpieczające z kołnierzem ISO 4161 Stal Ocynkowane 10

Műszaki adatok

Marka	Spiralock
Klasa	10
Gniazdo	Hexagon
Materiał	Stal
Kierunek gwintu	Prawy
Obróbka powierzchni	Ocynkowane
Gwint	Metryczny
Info	Thanks to its unique thread configuration the Spiralock flange nut offers a perfect solution where a joint must be reliably tightened and locked.Benefits of the Spiralock flange nut are a.o.: Exceptionally resistant to vibration loosening Eliminates need for other locking devices Accepts standard male fasteners (with thread tolerance class 4g6g, 6g, 6h and MJ) Improves joint fatigue life Consistent reusability Eases assembly, reducing assembly time Reduces life cycle cost of threaded jointsBecause of the Spiralock design, threaded joints generally require 10% - 20% greater torque than is required for standard joints, due to the redirecting of some assembly forces from an axial direction to a radial direction. The increase in torque will vary depending on the types of materials and coatings being used (nut, bolt, joint, etc.). This torque/tension relationship should be evaluated in the actual joint to determine the proper torque required to develop the specified tension. Guidance available through our Technology Department.

ISO	4161

Ehhez a termékhez nincsenek letölthető dokumentumok

Cikkszám Az Ön Cikksz.	Technikai adatok	Készlet	Nettó ár	Ár /	Mennyiség

	Készlet	Nettó ár		Regisztrálj Előző

Nincs találat a szűrésre