MAXXFAST Through bolt anchor Steel Zinc plated M20X170

Name: MAXXFAST Through bolt anchor Steel Zinc plated M20X170
Brand: MaxxFast
SKU: 30554200170
Availability: InStock

Zobacz wszystkie specyfikacje

Pakowane po 10

Tylko pełne opakowanie

Zobacz wszystkie warianty

Specyfikacje

Diameter	M20
Length	170 mm
Brand	Maxxfast
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Thread	Metric thread
Type no.	PROMAXX
Weight per piece (g)	416.05
Info	Code = Letter code marking d_o= Nominal diameter of drill bit d_f= Diameter of clearance hole in the fixture h₁= Depth of drilled hole to deepest point h_nom= Minimum hole depth h_ef= Effective anchorage depth t_fix(max) = Grip range s = Width across flats ring ø = Washer diameter S_cr,N = Spacing characteristic C_cr,N = Edge distance characteristic S_min.= Minimal spacing C_min.= Minimal edge distance N_rec= Recommended load in kN T_inst= Tightening torque in Nm The allowable load (N_rec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr,N and C_cr,N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	7318190090

Pobierz jako PDF Drukuj

Pobierz jako PDF Drukuj

Numer artykułu Twój kod artykułu	Specyfikacja	Stan magazynowy	Cena netto po rabacie	Cena za	Ilość

	Stan magazynowy	Cena netto po rabacie		Zapisz się Poprzedni

Dla wybranego filtra nie znaleziono żadnego wyniku