text.skipToContent text.skipToNavigation

Fischer fbn ii 12/250 (12x344) gs zp bolt anchor


Le goujon d'ancrage FBN II avec rondelle large est une fixation métallique pour des applications économiques dans le béton non fissuré. La partie filetée longue et les 2 profondeurs d'ancrage permettent une mise en oeuvre particulièrement flexible. En plus des installations en attente et traversantes, le goujon d'ancrage convient également pour les montages à distance. Avec sa rondelle large prémontée, la fixation métallique en acier électrozingué est recommandée pour la fixation de poutres porteuses, de traverses ou d'autres constructions bois.

Article number 45586FIS
Diameter
Length
Wrench width (mm) 19
Length (mm) 344
Thread type Metric
Packed per 1

Specifications

Diameter M12
Length 100 mm
Wrench width (mm) 19
Length (mm) 344
Thread type Metric
Thread size (metric) 12
Drill hole diameter (mm) 12
Number of washers 1
Fastening provision Nut
Bracing Split anchor
Number of nuts 1
Push-through installation Yes
Pre-positioned installation Yes
Spaced installation No
Max. clamping thickness (mm) 250
Surface protection anchor Galvanic/electrolytic zinc plated
With collar No
Fastening by expander tool No
Anchor model External thread
Brand Fischer
ETA-approval Yes
Weight per piece (g) 352.15
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code 7318190090

Description

Le goujon d'ancrage FBN II avec rondelle large est une fixation métallique pour des applications économiques dans le béton non fissuré. La partie filetée longue et les 2 profondeurs d'ancrage permettent une mise en oeuvre particulièrement flexible. En plus des installations en attente et traversantes, le goujon d'ancrage convient également pour les montages à distance. Avec sa rondelle large prémontée, la fixation métallique en acier électrozingué est recommandée pour la fixation de poutres porteuses, de traverses ou d'autres constructions bois.

Article numbers

Article number 45586FIS
EAN 4006209455869
UBB 500616649546
UNSPSC 31162101
Manufacturer article nr  45586
Do not close this page. This message will disappear, when the page is fully loaded.