Spherical washer DIN 6319 C Stainless steel A2 M12

Cikkszám
Diametro
marca	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	7.6
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Codice merceologico	Megtekint

Csomagolás: 25

Csak bontatlan csomagban

Az összes változat megtekintése

Műszaki adatok

Diametro	M12
marca	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	7.6
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Codice merceologico	Megtekint

Pdf letöltése Nyomtatás

DIN	6319-C

Pdf letöltése Nyomtatás

Cikkszám Az Ön Cikksz.	Technikai adatok	Készlet	Nettó ár	Ár /	Mennyiség

	Készlet	Nettó ár		Regisztrálj Előző

Nincs találat a szűrésre