text.skipToContent text.skipToNavigation

16/250 (16X370)


The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Description complète 
Numéro d'article 52192FIS
Diamètre
Longueur
Largeur de clé (mm) 24
Longueur (m) 368
Type de filetage Métrique
Voir toutes les spécifications 
Emballé par 10
Boîte complete uniquement

Spécifications

Diamètre M16
Longueur 100 mm
Largeur de clé (mm) 24
Longueur (m) 368
Type de filetage Métrique
Dimension du filetage métrique 16
Diamètre d'alésage (mm) 16
Nombre de disques 1
Dispositif de fixation Écrou
Ancrage Boulon d'ancrage à expansion
Nombre d'écrous 1
Montage traversant Oui
Intégration à fleur Oui
Montage à distance Non
Épaisseur max. de serrage (mm) 250
Traitement de la surface de l'ancrage Galvanisé/électrogalvanisé
Avec col Non
Fixation par outil d'extension Non
Exécution ancre Filetage extérieur
Marque Fischer
Principales caractéristiques Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Yes
Poids par pièce (g) 657.46
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Code Douanier

La description

The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions.

Numéros d'articles

Numéro d'article 52192FIS
EAN 4006209521922
UBB 500616677182
UNSPSC 31162101
N° Article du fabricant 52192
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.