text.skipToContent text.skipToNavigation

Wera Bit-Check 7 Diamond 1, 7 pièces


Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint.

Article number 3Z836146
Emballage Boîte en plastique
Nombre de bits PH 2
Nombre de bits PZ 2
Nombre de bits Torx 0
Nombre de bits fente 2
Packed per 1

Specifications

Emballage Boîte en plastique
Nombre de bits PH 2
Nombre de bits PZ 2
Nombre de bits Torx 0
Nombre de bits fente 2
Nombre de bits total 6
Avec support magnétique Non
Nombre de bits internes hexagonaux 0
Nombre de bits TriWing 0
Nombre de bits à deux trous 0
Avec cliquet de mèche Non
Nombre d’embouts quatre pans mâles 0
Avec poignée Non
Marque Wera
Code Douanier 82079030
Model BIT-CHECK

Description

Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint.

Article numbers

Article number 3Z836146
EAN 4013288179999
UBB 500643326415
UNSPSC 31161507
Manufacturer article nr  05057416001
Do not close this page. This message will disappear, when the page is fully loaded.