text.skipToContent text.skipToNavigation

Závitorezná skrutka s polguľatou hlavou s krížovou drážkou DIN 7516 AE-H Oceľ Pozinkované

Položka č.
Vlastnosti nákrutky Phillips
Tvar hlavy S vypuklou valcovou hlavou
Materiál Oceľ
Vlastnosti povrchu Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.

technické údaje

Vlastnosti nákrutky Phillips
Tvar hlavy S vypuklou valcovou hlavou
Materiál Oceľ
Vlastnosti povrchu Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.

Normy

DIN 7516-AE H

Produktov ({0})

  Sklad Čistá cena   PRIHLÁSIŤ SA
Nezatvárajte túto stránku. Táto správa zmizne, keď sa stránka úplne načíta.