12X40M10

Functioning - The FZEA II is suitable for pre-positioned installation. - The undercut drill hole is created using the special FZUB drill. - Once the anchor has been placed in the drill hole, the expansion sleeve is expanded by the driving in of the internal expansion pin with the FZED Plus setting tool, and the undercut drill hole is filled with a positive fit.

Descriere completa

Cod Articol	47307FIS
Lungime
Aprobare ETA	Yes
Info	d_o= Nominal diameter of drill bit. t = Recommended drilling depth. L (h_ef) = Effective anchorage depth. l_smin. = Screw-in depth min. l_smax. = Screw-in depth max. kN = Load in kN in combination with 8.8 & A4-70 bolts. T_inst= Tightening torque in Nm. The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322). Only part of the approval for light suspended ceilings. For further technical data the approval is available on request.

Vedeți toate specificațiile

Ambalat la 1

Specificații și standarde
Descărcări

Specificații

Lungime	43 mm
Aprobare ETA	Yes
Info	d_o= Nominal diameter of drill bit. t = Recommended drilling depth. L (h_ef) = Effective anchorage depth. l_smin. = Screw-in depth min. l_smax. = Screw-in depth max. kN = Load in kN in combination with 8.8 & A4-70 bolts. T_inst= Tightening torque in Nm. The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322). Only part of the approval for light suspended ceilings. For further technical data the approval is available on request.

Descărcați ca PDF Imprimare

Descriere

Numerele articolelor

Cod Articol	47307FIS
EAN	4006209473078
UBB	500616735675
UNSPSC	31162101
Nr. articol producător	47307

Descărcați informații suplimentare