12/140 (12X236)

Avantaje - Şaiba mai mare inclusă cu sistemul FBN II GS creează o suprafaţă mai mare de contact şi, ca atare, permite fixarea construcţiilor din lemn. - Şaiba pre-montată asigură o instalare rapidă. - În plus, bulonul de ancorare FBN II GS oferă toate beneficiile FBN II – vedeţi pagina .

Descriere completa

Cod Articol	45581FIS
Diameter
Lungime
Caracteristici cheie	Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Aprobare ETA	Yes
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Vedeți toate specificațiile

Ambalat la 10

Exclusiv împachetare

Specificații și standarde
Descărcări

Specificații

Diameter	M12
Lungime	189 mm
Caracteristici cheie	Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Aprobare ETA	Yes
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descărcați ca PDF Imprimare

Numerele articolelor

Cod Articol	45581FIS
EAN	4006209455814
UBB	500616649132
UNSPSC	31162101
Nr. articol producător	45581

Descărcați informații suplimentare