text.skipToContent text.skipToNavigation

Spring-type straight pin slotted, heavy duty ISO 8752 Spring steel 420-560 HV30 1X10MM

Article number
Diameter
Length
Material Spring steel
Material technical 420-560 HV30
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • For pins with a nominal diameter d ≥ 10 mm a single chamfer configuration is optional at the discretion of the manufacturer.
    • V = minimum shear strength, double, in kN.
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of slotted spring-type straight pins:
      • These pins are used to connect two or more construction elements to each other.
      • They are highly suitable to absorb shear forces.
      • If these pins are employed with bolted joints the below arrangement should be used:

Specifications

Diameter 1 mm
Length 10 mm
Material Spring steel
Material technical 420-560 HV30
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • For pins with a nominal diameter d ≥ 10 mm a single chamfer configuration is optional at the discretion of the manufacturer.
    • V = minimum shear strength, double, in kN.
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of slotted spring-type straight pins:
      • These pins are used to connect two or more construction elements to each other.
      • They are highly suitable to absorb shear forces.
      • If these pins are employed with bolted joints the below arrangement should be used:

Dimensions

a (min.) 0.15
d1 (max.) 1.3
d1 (min.) 1.2
d2 ≈ 0.8
D (mm) 1
L (mm) 10
s 0.2
V 0.7

Standards

ISO 8752
DIN 1481
NEN 2458
BS 7060

Article numbers

Article number 39100.010.010
EAN 8717077080157
UBB 500645331561
UNSPSC 31163201

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.