M10X120 K

Numer artykułu	0Z685162
Zawartość zestawu	4 x FIS G M 10 x 120, washer + nut
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Zobacz wszystkie specyfikacje

Pakowane po 1

Specyfikacje

Zawartość zestawu	4 x FIS G M 10 x 120, washer + nut
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Pobierz jako PDF Drukuj