text.skipToContent text.skipToNavigation

Retaining ring for shafts - normal type DIN 471 Stainless spring steel 1.4122 / 1.4021 4MM

Previous Next

Numero articolo
Diametro
marca Fabory
For nom. size 4
Material Stainless spring steel
Material technical 1.4122/1.4021
Nom. size shaft d1 4
Weight per piece (g) 0.03
Visualizza tutte le specifiche 
Confezionato per 200
Solo full box
Visualizza tutte le varianti

Specifiche

Diametro 4 mm
marca Fabory
For nom. size 4
Material Stainless spring steel
Material technical 1.4122/1.4021
Nom. size shaft d1 4
Weight per piece (g) 0.03
Info
  • Other types of stainless steel than specified (but with equal properties) may be supplied at the discretion of the manufacturer.
  • Avoid contact with chloride containing (cleaning-) liquids in order to reduce the risk of chloride induced stress corrosion cracking.
    • d4 is the minimum required installation space.
    • During assembly it is essential to not overspread the rings, a maximum spread of 1,01 x d1 is recommended. For proper installation use pliers with spread limiter or assemble the aid of a cone.
Codice merceologico

Dimensioni

Groove d2 3.8
Groove m (H13) 0.5
Groove n (min.) 0.3
Ring d3 3.7
Ring d4 8.6
Ring s 0.4
Ring b ≈ 0.8

Standard

BS 3673-4
DIN 471
NF E22-163

Numeri di articolo

Numero articolo 51435.004.001
EAN 8715492289537
UBB 950357142781
UNSPSC 31163202

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.