text.skipToContent text.skipToNavigation

M16X175


The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Descrizione completa 
Numero articolo 90288FIS
Diamètre
Longueur
Modèle Avec extrémité filetée
Longueur (m) 175
Dimension du filetage métrique 16
Visualizza tutte le specifiche 
Confezionato per 10
Solo full box

Specifiche

Diamètre M16
Longueur 175 mm
Modèle Avec extrémité filetée
Longueur (m) 175
Dimension du filetage métrique 16
Diamètre d'alésage (mm) 18
Profondeur d'ancrage réelle (mm) 80
Avec cartouche de mortier Non
Marque Fischer
ETA-approval Yes
Poids par pièce (g) 271.2
Info
  • Ccr, N = Characteristic Edge distance (tensile).
  • Cmin. = Minimum edge distance (tensile).
  • df = Hole diameter in fixture.
  • do = Hole diameter in substrate.
  • hef = Effective embedment depth.
  • hmin = Minimum substrate thickness.
  • ho = Minimum hole depth.
  • Scr, N = Characteristic spacing.
  • Concrete C20/25 recommended load for non-cracked concrete.
  • The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Code Douanier 73184542

Descrizione

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Numeri di articolo

Numero articolo 90288FIS
EAN 4006209902882
UBB 500616696646
UNSPSC 31161601
Nr articolo produttore  90288
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.