LINDAPTER Girder clamp system Steel Zinc plated with JS500 topcoat M16

Cod Articol
marca	Lindapter
Material	Steel
Surface treatment	Zinc plated with JS500 topcoat
Thread	Metric thread
Weight per piece (g)	8200
Info	JS500 is a topcoat that significantly improves the corrosion resistance of zinc-electroplated parts. The Flush Clamp is an adjustable steelwork connection that clamps the flanges of two steel beams together without the use of a location plate. This assembly forms a clamp that is suitable for connecting beams of varying flange widths and thicknesses. The Flush Clamp is supplied as a set, containing 4 each of six basic components: special body, special bolts, special washers, flat washers, hexagon nuts and thin nuts. Extensive information is available on the Lindapter website.
Codice merceologico	73269060

Vedeți toate specificațiile

Specificații

marca	Lindapter
Material	Steel
Surface treatment	Zinc plated with JS500 topcoat
Thread	Metric thread
Weight per piece (g)	8200
Info	JS500 is a topcoat that significantly improves the corrosion resistance of zinc-electroplated parts. The Flush Clamp is an adjustable steelwork connection that clamps the flanges of two steel beams together without the use of a location plate. This assembly forms a clamp that is suitable for connecting beams of varying flange widths and thicknesses. The Flush Clamp is supplied as a set, containing 4 each of six basic components: special body, special bolts, special washers, flat washers, hexagon nuts and thin nuts. Extensive information is available on the Lindapter website.
Codice merceologico	73269060

Flange thickness/adjustability	5
Flange width/adjustability	75
Max. load (5:1) (kN)	30
Tightening torque (Nm)	147

Descărcați ca PDF Imprimare

Descărcați ca PDF Imprimare

Cod articol Numărul tău cod articol	Specificații	Stoc	Preț Net	Preț pe	Cantitate

	Stoc	Preț Net		Inscrie-te Anterior

Nici un rezultat găsit pentru acest filtru