text.skipToContent text.skipToNavigation

KIPP Indexing plungers without collar, with locknut Metric fine thread Stainless steel 1.4305, pin not hardened 4MM

Numero articolo
marca Kipp
D1_MM 8
Material Stainless steel
Material technical 1.4305
Thread Metric fine thread
Weight per piece (g) 10.4
Info Material: Stainless steel threaded sleeve 1.4305 Indexing pin 1.4305 Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.
Visualizza tutte le specifiche 

Specifiche

marca Kipp
D1_MM 8
Material Stainless steel
Material technical 1.4305
Thread Metric fine thread
Weight per piece (g) 10.4
Info Material: Stainless steel threaded sleeve 1.4305 Indexing pin 1.4305 Mushroom knob black grey thermoplastic.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is slid beneath the disengaged mushroom knob so that the carrier pins engage in the slot.
Codice merceologico

Dimensioni

D 4
D1 8
D2 18
F1 = springiness beginning in N 6
F2 = springiness end in N 12
F x 30° 1.3
H 4
L1 21
L2 13.5
L 38.5
P 1
SW 13

Numeri di articolo

Numero articolo 58605.000.004
EAN 4059245015153
UBB 500689882321
UNSPSC 31162807
Nr articolo produttore  K0343.12004

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.