text.skipToContent text.skipToNavigation

KIPP Indexing plungers with cylindrical pin, premium Metric fine thread Stainless steel 1.4305, hardened pin, plastic grip 6MM

Numero articolo
marca Kipp
D1_MM 12
Material Stainless steel
Material technical 1.4305
Thread Metric fine thread
Weight per piece (g) 28.3
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping.
Visualizza tutte le specifiche 

Specifiche

marca Kipp
D1_MM 12
Material Stainless steel
Material technical 1.4305
Thread Metric fine thread
Weight per piece (g) 28.3
Info Material: Stainless steel Threaded sleeve 1.4305 indexing pin 1.4034 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and bright.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping.
Codice merceologico

Dimensioni

D 6
D1 12
D2 25
D3 10
D4 8.5
D5 (Tol.) 8.5
F 1.8
F1 = springiness beginning in N 6
F2 = springiness end in N 14
H 6
L1 20
L2 8
L3 17
L4 3
L 51.7
P 1.5
SW 14

Numeri di articolo

Numero articolo 58730.000.006
EAN 4059245012381
UBB 500689937034
UNSPSC 31162807
Nr articolo produttore  K0736.401206

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.