text.skipToContent text.skipToNavigation

High performance anchor type FH II-B M12X100/10


The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas.

Numéro d'article 506897FIS
Diametro
Design Con estremità a bottone
Lunghezza (m) 142
Dimensione della filettatura (metrica) 12
Diametro del foro (mm) 14
Emballé par 1

Spécifications

Diametro M12
Design Con estremità a bottone
Lunghezza (m) 142
Dimensione della filettatura (metrica) 12
Diametro del foro (mm) 14
Profondità di ancoraggio effettiva (mm) 100
Con capsula in resina No
marca Fischer
Weight per piece (g) 125.78
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codice merceologico

La description

The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas.

Numéros d'articles

Numéro d'article 506897FIS
EAN 4048962078091
UBB 500616665534
UNSPSC 31162101
N° Article du fabricant 506897
Ne fermez pas cette page. Ce message disparaîtra lorsque la page sera entièrement téléchargée.