High performance anchor type FH II-B 16X125

Numero articolo	508001FIS
Materiale	Resina vinilestere
Diametro del foro (mm)	18
Profondità del foro (mm)	140
Profondità di ancoraggio effettiva (mm)	125
marca	Fischer
Suitable for	FHB II-A L M 16 x 125
Weight per piece (g)	47.38
Visualizza tutte le specifiche

Confezionato per 1

Specifiche

Materiale	Resina vinilestere
Diametro del foro (mm)	18
Profondità del foro (mm)	140
Profondità di ancoraggio effettiva (mm)	125
marca	Fischer
Suitable for	FHB II-A L M 16 x 125
Weight per piece (g)	47.38
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codice merceologico	Visualizza

Scarica PDF Stampa

Scarica PDF Stampa