text.skipToContent text.skipToNavigation

DIN 6319 C Steel 550+100 HV10 Plain M30

Previous Next

Numero articolo
Diametro
marca Fabory
Material Steel
Material technical 550+100 HV10
Surface treatment Plain
Tipo no. C
Weight per piece (g) 100.14
Visualizza tutte le specifiche 
Confezionato per 25
Solo full box
Visualizza tutte le varianti

Specifiche

Diametro M30
marca Fabory
Material Steel
Material technical 550+100 HV10
Surface treatment Plain
Tipo no. C
Weight per piece (g) 100.14
Info
  • F max = Maximum recommended static load (values do not apply to stainless steel)
  • These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through.
  • ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength Rp0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength Rp0,2
  • Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose
Codice merceologico

Dimensioni

F max (kN) 269
d1 (H13) 31
d2 ( H13) 35
d3 56
h2 11.2
h4 ≈ 19.2

Standard

DIN 6319-C

Numeri di articolo

Numero articolo 16206.300.001
EAN 4020772081805
UBB 950356451183
UNSPSC 31161801

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.