Conical seat DIN 6319 D Stainless steel A2 type D M20

Numero articolo
Diametro
marca	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	32.4
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D
Codice merceologico	7318220098

Visualizza tutte le specifiche

Confezionato per 25

Solo full box

Visualizza tutte le varianti

Specifiche

Diametro	M20
marca	Fabory
Material	Stainless steel
Material technical	A2
Weight per piece (g)	32.4
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D
Codice merceologico	7318220098

Scarica PDF Stampa

DIN	6319-D

Scarica PDF Stampa

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.