A M10X170

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Plný popis

Objednací číslo	44969FIS
Diametro
Lunghezza
Design	Con estremità a bottone
Lunghezza (m)	170
Dimensione della filettatura (metrica)	10

Zobrazit všechny specifikace

Baleno po 1

Specifikace

Diametro	M10
Lunghezza	170 mm
Design	Con estremità a bottone
Lunghezza (m)	170
Dimensione della filettatura (metrica)	10
Diametro del foro (mm)	12
Profondità di ancoraggio effettiva (mm)	60
Con capsula in resina	No
marca	Fischer
ETA-approval	Yes
Weight per piece (g)	97.83
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codice merceologico	73184542

Stáhnout jako PDF Tisk

Popis

Čísla materiálu

Objednací číslo	44969FIS
EAN	4006209449691
UBB	500616648142
UNSPSC	31161601
Výrobní číslo položky	44969

Stáhnout jako PDF Tisk

Stáhnout další informace