text.skipToContent text.skipToNavigation

D-fejű, kereszthornyos menetmetsző csavar DIN 7516 AE-H Acél Horganyzott

Cikkszám
Behajtási tulajdonságok Phillips
Fej alak Domborított hengeres fej
Anyag Acél
Felületkezelés Horganyzott
Menetek Metrikus menet
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.

Műszaki adatok

Behajtási tulajdonságok Phillips
Fej alak Domborított hengeres fej
Anyag Acél
Felületkezelés Horganyzott
Menetek Metrikus menet
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.

Szabványok

DIN 7516-AE H

Ön a következőre keresett: "taptite". változatot találtunk.

  Készlet Nettó ár   Regisztrálj
Ne zárja be ezt az oldalt. Ez az üzenet eltűnik, amikor az oldal teljesen betöltődik.