text.skipToContent text.skipToNavigation

Hexagon thin nut MF DIN 439 2 Stainless steel A2 Min.50 M8X0,75 (≠DIN)


Article number
Diameter
Class Min.50
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
View all specifications 
Packed per 200
Full Box only
View all variants

Specifications

Diameter M8
Class Min.50
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Dimensions

d-D M8
m 4
P 0.75
s 13

Standards

NEN 2334-B
ISO 8675
DIN 439-2
ASME B18.2.4.5M
NF E25-453

Article numbers

Article number 51092.080.075
EAN 8715494139533
UBB 500571314557
UNSPSC 31161727

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.