text.skipToContent text.skipToNavigation

Hexagon thin nut MF DIN 439 2 Stainless steel A2 Min.50 M12X1,50


Article number
Diameter
Class Min.50
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
Packed per 100
Full Box only

Specifications

Diameter M12
Class Min.50
Driving features Hexagon
Material Stainless steel
Material technical A2
Thread direction Right
Thread Metric fine thread
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Dimensions

d-D M12
m 6
P 1.5
s 19

Standards

DIN 439-2
NEN 2334-B
ASME B18.2.4.5M
ISO 8675
NF E25-453

Article numbers

Article number 51092.120.150
EAN 8715492268198
UBB 950355569274
UNSPSC 31161727

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.