text.skipToContent text.skipToNavigation

M6 S/10


Funcionamiento - TAM es apto para la instalación pre-posicionada. - Al aplicar el par de apriete, el cono se introduce en el manguito de expansión y se expande contra la pared del agujero. - Para una instalación correcta, se debe garantizar que el anclaje pre-posicionado TA M pueda ser soportado sobre la unión, o que la varilla roscada pueda ser fijada por tuerca. - Determinación de la longitud de tornillo l s : Longitud de tornillo l s = longitud de fijación + grosor de fijación t fix + grosor de arandela.

Artículo No. 90249FIS
Diámetro
Longitud
Características clave Functioning - The TAM is suitable for pre-positioned installation. - When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. - For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered. - Determining the screw length l s : Screw length l s = Length of fixing + Thickness of fixture t fix + Thickness of washer.
Aprobación de ETA Yes
Info
  • do= Nominal diameter of drill bit.
  • dd= Embedment depth.
  • df= Anchor diameter.
  • fs= Head diameter.
  • Ws= Setting tool diameter.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • kN = Allowable load in kN.
Embalado por 1

Especificaciones

Diámetro 6 mm
Longitud 60 mm
Características clave Functioning - The TAM is suitable for pre-positioned installation. - When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. - For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered. - Determining the screw length l s : Screw length l s = Length of fixing + Thickness of fixture t fix + Thickness of washer.
Aprobación de ETA Yes
Info
  • do= Nominal diameter of drill bit.
  • dd= Embedment depth.
  • df= Anchor diameter.
  • fs= Head diameter.
  • Ws= Setting tool diameter.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • kN = Allowable load in kN.

Números de artículo

Artículo No. 90249FIS
EAN 4006209902493
UBB 500616785332
UNSPSC 31161607
Artículo del fabricante nr 90249
No cierre esta página. Este mensaje desaparecerá cuando la página esté completamente cargada.