text.skipToContent text.skipToNavigation
Fabory UK will be closed on Friday 29th March and Monday 1st April 2024. Any quotes for delivery times exclude these days.

MAXXFAST Hammerset anchor Steel Zinc plated

Article number
Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info *Special for diamond drilling machines.
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

Specifications

Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info *Special for diamond drilling machines.
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

You have searched for "maxxfast". We have found variants.

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.