Spherical washer DIN 6319 C Steel 550+100 HV10 Plain

Cod Articol
Brand	Fabory
Material	Steel
Material technical	550+100 HV10
Surface treatment	Plain
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

Vedeți toate specificațiile

Specificații

Brand	Fabory
Material	Steel
Material technical	550+100 HV10
Surface treatment	Plain
Info	F max = Maximum recommended static load (values do not apply to stainless steel) These spherical washers are often combined with conical seats to DIN 6319-D or DIN 6319-G. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these washers are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply conical seats to DIN 6319-D with slotted holes, but use conical seats to DIN 6319-G for this purpose

DIN	6319-C

Cod articol Numărul tău cod articol	Specificații	Stoc	Preț Net	Preț pe	Cantitate

	Stoc	Preț Net		Inscrie-te Anterior

Nici un rezultat găsit pentru acest filtru