text.skipToContent text.skipToNavigation

Stahlwille úhloměr č. 7385N vnitřní čtverec 3/4„ vnější čtverec 3/4“ D.416mm


for angle controlled bolt/screw tightening, with static read-off pointread-off possible from any angle thanks to a pair of angled scalesremovable magnet for attaching sockets with 1/2" internal square drivefor use in conjunction with tightening tools such as service MANOSKOP® No 730Nsince this tightening method requires a pre-determined snug torque to be applied, it is essential to choose a torque wrench covering both snug torque as well as maximum torque required to reach the recommended tightening anglewhether 1/2" or 3/4" square drive torque angle gauge is used depends upon the square drive of the appropriate torque wrench employed

Objednací číslo G0636.007.385
Typ příslušenství/komponentů Jiný
Celková délka (mm) 416
Držák 3/4 palce
Příslušenství Ano
Díl Ne
Baleno po 1

Specifikace

Typ příslušenství/komponentů Jiný
Celková délka (mm) 416
Držák 3/4 palce
Příslušenství Ano
Díl Ne
Značka Stahlwille
Váha kusu (g) 494
HS kód 8204110000
Type Angle Measuring Disc

Popis

for angle controlled bolt/screw tightening, with static read-off pointread-off possible from any angle thanks to a pair of angled scalesremovable magnet for attaching sockets with 1/2" internal square drivefor use in conjunction with tightening tools such as service MANOSKOP® No 730Nsince this tightening method requires a pre-determined snug torque to be applied, it is essential to choose a torque wrench covering both snug torque as well as maximum torque required to reach the recommended tightening anglewhether 1/2" or 3/4" square drive torque angle gauge is used depends upon the square drive of the appropriate torque wrench employed

Čísla materiálu

Objednací číslo G0636.007.385
EAN 4018754136131
UBB 203193011053
UNSPSC 27111715
Výrobní číslo položky 54010002
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.