The Type HW / HC is a two part attachment designed to be used where the steelwork has been pre-drilled. The hemispherical Washer and Cup allow building services to be suspended vertically from angled beams of up to 10° swing either side of the vertical. Manufactured from malleable iron with a zinc plated or hot dip galvanised finish to provide high performance and anti-corrosion protection. Simple cost effective solution. Washer can be used without cup.
The Type HW / HC is a two part attachment designed to be used where the steelwork has been pre-drilled. The hemispherical Washer and Cup allow building services to be suspended vertically from angled beams of up to 10° swing either side of the vertical. Manufactured from malleable iron with a zinc plated or hot dip galvanised finish to provide high performance and anti-corrosion protection.