Fischer ZYKON undercut anchor FZA

Article number
Brand	Fischer
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Info	T_inst= Tightening torque in Nm High permissible for assembly in tension zones! The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
View all specifications

Specifications

Brand	Fischer
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Info	T_inst= Tightening torque in Nm High permissible for assembly in tension zones! The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Article number Your article number	Specifications	Stock	Net price	Price per	Quantity

	Stock	Net price		Sign up Previous

No results found for this filter.