Disc spring for critical applications Steel Ck 67 Werkstoffnr. 1.1231 Phosphated

Artikelnummer
Brand	Fabory
Material	Steel
Material technical	Ck 67 Werkstoffnr. 1.1231
Surface treatment	Phosphated
Info	Warning: electroplating of these products may cause hydrogen embrittlement. Disc springs are mostly used in critical applications with safety first. Similar applications can be found in for example safety torque limiter clutches, hinge stiffeners and applications of constant roll pressure. Because of the right combination c.q. stacking of the disc springs the elasticity and/or deflection can be dosed accurately. The technical specifications of these disc springs meet the highest expectations with reference to the static and dynamic load. They exceed the requirements of DIN 2093. Material group 1: t 1,25 from steel Ck 67. Material group 2: 1,25 ≤ t ≤ 6,0 from steel 50 Cr V4. Material group 3: 6,0 > t ≤ 14,0 from steel 50 Cr V4. Fatique fractures can be largely prevented because the disc springs of material group 2 and 3 have machined edges. F = spring force in Newton at a deflection s ≈ 0,75 h_o(h_o= L_o– t). For the calculation of disc springs, see DIN 2092. Extensive technical data available on request.

Bekijk alle specificaties

Specificaties

Brand	Fabory
Material	Steel
Material technical	Ck 67 Werkstoffnr. 1.1231
Surface treatment	Phosphated
Info	Warning: electroplating of these products may cause hydrogen embrittlement. Disc springs are mostly used in critical applications with safety first. Similar applications can be found in for example safety torque limiter clutches, hinge stiffeners and applications of constant roll pressure. Because of the right combination c.q. stacking of the disc springs the elasticity and/or deflection can be dosed accurately. The technical specifications of these disc springs meet the highest expectations with reference to the static and dynamic load. They exceed the requirements of DIN 2093. Material group 1: t 1,25 from steel Ck 67. Material group 2: 1,25 ≤ t ≤ 6,0 from steel 50 Cr V4. Material group 3: 6,0 > t ≤ 14,0 from steel 50 Cr V4. Fatique fractures can be largely prevented because the disc springs of material group 2 and 3 have machined edges. F = spring force in Newton at a deflection s ≈ 0,75 h_o(h_o= L_o– t). For the calculation of disc springs, see DIN 2092. Extensive technical data available on request.

Voor dit product zijn geen downloads beschikbaar.

Artikelnummer Uw artikelnummer	Specificaties	Voorraad	Netto prijs	Prijs per	Hoeveelheid

	Voorraad	Netto prijs		Aanmelden Vorige

Geen resultaten gevonden