text.skipToContent text.skipToNavigation

Tyrolit Cylindrical mandrel 4X8-3X30

Article number 2J877343
Head form Cylinder
Shaft length 30
Diameter 4
Material Aluminium oxide
Holding shaft 3

Specifications

Head form Cylinder
Shaft length 30
Diameter 4
Material Aluminium oxide
Holding shaft 3
Granulation 120
Suitable for stainless steel Yes
Suitable for aluminium Yes
Suitable for steel Yes
Suitable for non-ferrous metals Yes
Particle type Corundum
Burr Yes

Description

For demanding work such as deburring, bevelling and edge breaking on high-alloyed steels and HSS Grit size 46 for rough grinding Grit size 60 – 120 for fine grinding Note operating speed of max. 35 m/s Enables workpieces to be machined down to the lowest tolerance ranges Strikes a perfect balance in terms of chip performance and the intended surface finish Vitrified bond with white aluminium oxide specially for high-alloyed steels and HSS For demanding work such as deburring, bevelling and edge breaking on high-alloyed steels and HSS Grit size 46 for rough grinding Grit size 60 – 120 for fine grinding Note operating speed of max. 35 m/s Enables workpieces to be machined down to the lowest tolerance ranges Strikes a perfect balance in terms of chip performance and the intended surface finish Vitrified bond with white aluminium oxide specially for high-alloyed steels and HSS

Article numbers

Article number 2J877343
EAN 9003170020206
UBB 500572069358
UNSPSC 31191500
Manufacturer article nr  2020
Do not close this page. This message will disappear, when the page is fully loaded.