text.skipToContent text.skipToNavigation

Spring-type straight pin slotted, light duty ISO 13337 Spring steel 420-560 HV30

Article number
Material Spring steel
Material technical 420-560 HV30
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • For pins with a nominal diameter d ≥ 10 mm a single chamfer configuration is optional at the discretion of the manufacturer.
    • The type of austenitic stainless spring steel is at the manufacturer’s discretion and may vary from the steel types stated in ISO 3506.
    • V = minimum shear strength, double, in kN (valid for steel pins only).
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of slotted spring-type straight pins:
      • These pins are used to connect two or more construction elements to each other.
      • They are highly suitable to absorb shear forces.

Specifications

Material Spring steel
Material technical 420-560 HV30
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Dimensions d1 and d2 in above table are before mounting.
    • For pins with a nominal diameter d ≥ 10 mm a single chamfer configuration is optional at the discretion of the manufacturer.
    • The type of austenitic stainless spring steel is at the manufacturer’s discretion and may vary from the steel types stated in ISO 3506.
    • V = minimum shear strength, double, in kN (valid for steel pins only).
    • The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of slotted spring-type straight pins:
      • These pins are used to connect two or more construction elements to each other.
      • They are highly suitable to absorb shear forces.

Standards

DIN 7346
ISO 13337

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.