text.skipToContent text.skipToNavigation

Concrete anchoring screw hexagon type US Ultracut Carbon steel, hardened Zinc plated

Article number
Surface treatment Zinc plated
Thread Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Specifications

Surface treatment Zinc plated
Thread Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.