text.skipToContent text.skipToNavigation

Tellerfedern, für kritische Anwendungen Stahl Ck 67 Werkstoffnr. 1.1231 Phosphatiert

Artikelnummer
Material Stahl
Material technisch Ck 67 Werkstoffnr. 1.1231
Oberfläche Phosphatiert
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Disc springs are mostly used in critical applications with safety first. Similar applications can be found in for example safety torque limiter clutches, hinge stiffeners and applications of constant roll pressure. Because of the right combination c.q. stacking of the disc springs the elasticity and/or deflection can be dosed accurately. The technical specifications of these disc springs meet the highest expectations with reference to the static and dynamic load. They exceed the requirements of DIN 2093.
    • Material group 1: t 1,25 from steel Ck 67.
    • Material group 2: 1,25 ≤ t ≤ 6,0 from steel 50 Cr V4.
    • Material group 3: 6,0 > t ≤ 14,0 from steel 50 Cr V4.
    • Fatique fractures can be largely prevented because the disc springs of material group 2 and 3 have machined edges.
    • F = spring force in Newton at a deflection s ≈ 0,75 ho(ho= Lo– t).
    • For the calculation of disc springs, see DIN 2092.
    • Extensive technical data available on request.

Spezifikationen

Material Stahl
Material technisch Ck 67 Werkstoffnr. 1.1231
Oberfläche Phosphatiert
Info
  • Warning: electroplating of these products may cause hydrogen embrittlement.
    • Disc springs are mostly used in critical applications with safety first. Similar applications can be found in for example safety torque limiter clutches, hinge stiffeners and applications of constant roll pressure. Because of the right combination c.q. stacking of the disc springs the elasticity and/or deflection can be dosed accurately. The technical specifications of these disc springs meet the highest expectations with reference to the static and dynamic load. They exceed the requirements of DIN 2093.
    • Material group 1: t 1,25 from steel Ck 67.
    • Material group 2: 1,25 ≤ t ≤ 6,0 from steel 50 Cr V4.
    • Material group 3: 6,0 > t ≤ 14,0 from steel 50 Cr V4.
    • Fatique fractures can be largely prevented because the disc springs of material group 2 and 3 have machined edges.
    • F = spring force in Newton at a deflection s ≈ 0,75 ho(ho= Lo– t).
    • For the calculation of disc springs, see DIN 2092.
    • Extensive technical data available on request.

Produkte ({0})

  Vorrat Nettopreis   Anmelden
Schließen Sie diese Seite nicht. Diese Meldung wird verschwinden, wenn die Seite vollständig geladen ist.