text.skipToContent text.skipToNavigation

Závitořezný šroub se zápustnou hlavou s křížovou drážkou DIN 7516 DE-H Ocel Pozinkované

Objednací číslo
Typ drážky Phillips
Tvar hlavy Se zápustnou hlavou
Materiál Ocel
Povrchová úprava Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.

Specifikace

Typ drážky Phillips
Tvar hlavy Se zápustnou hlavou
Materiál Ocel
Povrchová úprava Pozinkované
Závit Metrický závit
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.

Normy

DIN 7516-DE H

Hledali jste „taptite“. Našli jsme variant.

  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.