text.skipToContent text.skipToNavigation

KIPP Indexing plungers with threaded pin, with locknut Metrický jemný závit Nerezová ocel 1.4305, netvrzený kolik 16MM


Objednací číslo
D1_MM 24
Materiál Nerezocel
Technický materiál 1.4305
Závit Metrický jemný závit
Info Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4305.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.
Baleno po 1

Specifikace

D1_MM 24
Materiál Nerezocel
Technický materiál 1.4305
Závit Metrický jemný závit
Info Material: Stainless steel. Threaded sleeve 1.4305. Indexing pin 1.4305.Version: Indexing pin not hardened, ground and bright.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation e.g. program controlled pneumatic cylinder or by remote control using Bowden cables.

Rozměry

D 16
D1 24
D2 10
F1 = springiness beginning in N 20
F2 = springiness end in N 46
F x 30° 3.2
H 16
L1 32
L2 18
L3 14
L4 28
L 80
P 2
SW1 27
SW2 36

Čísla materiálu

Objednací číslo 58593.000.016
EAN 4059245014224
UBB 500689875150
UNSPSC 31162807
Výrobní číslo položky K0341.12516

Produktů ({0})

  Sklad Čistá cena   Přihlásit se
Tuto stránku nezavírejte. Tato zpráva zmizí, jakmile se stránka zcela načte.