text.skipToContent text.skipToNavigation

Grooved pin, half length taper grooved DIN 1472 Free-cutting steel 1,5X10MM


Article number
Diameter
Length
Material Free-cutting steel
Info
  • V = minimum shear strength double shear in kN (valid for steel pins only).
  • Diameter d2 is the diameter over the grooved edges (valid for steel pins only).
  • The recommended tolerance class for the accommodating hole diameter d1 (nominal) is H11.
  • The nominal length (L, tolerance class js15) does not include the rounded ends.
Packed per 250
Full Box only

Specifications

Diameter 1.5 mm
Length 10 mm
Material Free-cutting steel
Info
  • V = minimum shear strength double shear in kN (valid for steel pins only).
  • Diameter d2 is the diameter over the grooved edges (valid for steel pins only).
  • The recommended tolerance class for the accommodating hole diameter d1 (nominal) is H11.
  • The nominal length (L, tolerance class js15) does not include the rounded ends.

Dimensions

c ≈ 0.2
d1 1.5
d2 ≈ 1.6
D (mm) 1.5
L (mm) 10
r ≈ 1.5
Tolerance h9
V 1.6

Standards

ISO ≈8745
NEN ≈2603
DIN 1472

Article numbers

Article number 39720.015.010
EAN 8717077083615
UBB 500645365221
UNSPSC 31163215

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.